Contact Us

Shenzhen World Bridge Electronics Co.,Ltd
Tel: 86-755-29927150

Fax: 86-755-29927150
Phone: 86-13723735286
Email: cindy@wbe.com.cn
Contact person: cindy huang
ADD: 1003-1004, B Building, Shenye Century Industry Center, Hezhou, Zhoushi North Road, Xixiang, Baoan District, Shenzhen,  Guangdong, China

Half Insert RAW Data TTL Output Card Reader

Half Insert RAW Data TTL Output Card Reader

1. OVERVIEW WB R -1300 series is the manual half-insertion magnetic card reader with TTL interface, and read approximately 60% of the magnetic stripe and read magnetically encoded data from magnetic stripes that conform to ISO standards and decode them to CLS, RCL and RDT 2 FEATURES 2.1...

Half insert RAW data TTL output card reader


1. OVERVIEW

 

WBR-1300 series is the manual half-insertion magnetic card reader with TTL interface, and read approximately 60% of the magnetic stripe and read magnetically encoded data from magnetic stripes that conform to ISO standards and decode them to CLS, RCL and RDT


FEATURES

 

2.1 3-Dimensional Head Mounting Design achieves Optimal Adhesion with Minimal Wear.

2.2 Universal Head Mounting makes Switching between Tracks Quick and Easy.

2.3 Spring and steel axis-Action Card Guidance System aids Simple and Compact Structure.

2.4 Custom Ics provide 24% Jitter compensation over a Wide Range of Card Feeding Speeds.

2.5 High Coercive Magnetic Stripe up to 3,500Oe can be read.


3. SPECIFICATIONS

 

Card Standard

ISO 7811

Track No.

(IATA)

 (ABA)

 (MINTS)

Reading Method

F2F (FM)

Recording Density

210 BPI

75 BPI

210 BPI

Recording Capacity

79 Characters

(7-bit code)

40 Characters

(5-bit code)

107 Characters

(5-bit code)

Card Thickness

0.76 + 0.08 mm

Power Supply

3.0~5.5V DC

Power Consumption

Less than2.0mA (Single),  5mA(Double),  7mA(Triple) /5V

Ripple

Less than 50mVp-p

Reading Track Width

1.5mm

Operation Locus

Indoors only

Card Feeding Speed

15­ 120 cm/sec (6-50inch/sec)

Head Life time

500,000  passes min.

Error Rate

Less than 0.5%

Insulation Voltage & Resistance

500 V DC for 1min., 10M Ohm or more at 500 V DC(Between ground and frame)

Weight

Approx. 45g


4. ENVIRONMENTAL REQUIREMENTS

 

Operating Temperature

-30°C ~70°C

Conservation Temperature

-55°C ~ 150°C

Vibration

Amplitude 2mm , 2 G , 10­55Hz/min in x,y,z direction

Shock Resistance

Up to 30 G, 11 msec

Input Current

25mA

Output Current

10mA

5. OUTPUT VOLTAGE LEVELS

 

 High Level : 3.5V max (at 8.0 mA)

Low Level : 0.4V max (at 8.0 mA)


6. NOTES FOR BETTER OPERATION

 Half insert RAW data TTL output card reader

 The card should be inserted in the specified direction.

Cards which meet standards should be used.

 Cards should not be dirty, scratched or deformed.

 Cards should not be placed near magnets or damp.

 Standard condition is temperature at 20°C + 50°C and humidity at 35% ­ 60% RH.

Specification to be changed or revised without notice.

 7.Application

* gaming system 

* access control system 

* Hotel door lock system 

8.Drawing 

图片1.jpg


Half insert RAW data TTL output card reader


9.FAQ 

_Any difference between RS232 interface and TTL Interface ?

RE: yes .The difference is TTL interface with undecode  chip .all data is raw data ,you should decode the data by your own decoder.

- Can i  add bezel to this TTL interface 

RE: sure ,the bezel is optional 

_ Does this type  read all data from card ?

RE: read 60% data .if your data is full card ,sometime there is error when it is reading

-what's you MOQ ?

RE: MOQ is 100 pcs ,but sample order is acceptable at first order .

10.shipping 

shipping.jpg 



Hot Tags: half insert raw data ttl output card reader, China, manufacturers, ATM, POS, low price
Inquiry